Turn our spy cam into a super security system. Mount your camera on to Robo-Scan. Then attach Robo-Scan to a tripod or wall and now you can scan back and forth and up and down, up to 240º! Can be set on auto or manual. Now you won't be stuck looking in only one direction. With your camera mounted on Robo-Scan, you will now be able to see and record much more area.
How It Works
With the included remote control you can tell your camera where to look, both up and down and side to side. You can even preset four of your favorite positions. Set it on auto scan so when you are away the camera will automatically scan just like those expensive security cameras.
How To Use
-Have the camera follow your kids around as they play, as the kids move use the remote control to have the camera keep an eye on them. Scan from one room to the other to monitor several areas
-Use as a security camera to record in several areas, set for auto-scan and scan 4 preset areas, great for when you arn't home but want to record many different areas.
It's Easy
Place the Robo-Scan base on a table or platform, connect the base to a TriPod, or mount the Robo-Scan to any wall using the included wall mount. Attach any XCam2 Video Camera to the Robo-Scan Base, then view all the action on any TV/VCR! Then using the ScanPad Remote control up/down and left/right as you scan all the action! The motor is extremely quiet, unnoticeable to people in the room! Record Only the Action! The new Pan 'n Tilt works great when used with the VCR Commander. Once motion is detected you can have your VCR turn on and start recording. Then using the Robo-Scan, your camera can sweep between 4 preset locations to record all the action in the area. You'll be sure to catch ALL the action!
What You Get
1 Pan 'n Tilt Base
1 Wall Mount
1 FREE ScanPad Remote - $50 Value!
1 Addressable Power Supply
5 mounting screws for Wall Mount
2026$89.99
Robo-Scan Pan n' Tilt
This is a brand new product as sold at The DoItYourselfHut. Introducing the most exciting and significant Video Surveillance product of the year! It's the NEW Ninja Pan 'n Tilt, a video camera mount and controller that allows you to easily move your XCam2 Camera from left to right, and up to down! With the included Scan Pad Remote, you can remotely move the position of the camera to monitor whatever you want! With its Ultra Sweep & Scan™ feature you can put your camera on auto-pilot to sweep between 4 preset locations, perfect for when you're not home! .
Lots of Bang!
GET THE POWER OF 4! Without the Ninja Robo-Scan, your camera can view only 60º! When you attach your camera to the Ninja, you'll be able to view 240°, which is what 4 cameras can see!
SIMPLE AS 1-2-3! Place the Ninja Robo-Scan base on a table or platform, connect the base to a TriPod, or mount the Robo-Scan to any wall using the included wall mount. Attach any XCam2 Video Camera to the Ninja Base, then view all the action on any TV or PC*! Then using the ScanPad Remote control up/down and left/right as you scan all the action! The motor inside the Ninja is extremely quiet, unnoticeable to people in the room!
Included in your Robo-Scan kit
-
1 Ninja Pan 'n Tilt Base
-
1 Ninja Wall Mount
-
1 FREE Ninja ScanPad Remote - $50 Value!
-
1 Addressable Power Supply
-
5 mounting screws for Wall Mount
Works Right out of the Box!! | "NEW Ninja Pan 'n Tilt Mount takes Wireless Video Surveillance to the next level!" |
| . |
-
Incredible 240º x 130º Pan 'n Tilt Range - Now you can easily control remotely what your camera is looking at; Pan 240 degrees left to right (31 seconds per cycle) and tilt 130 degrees up and down! (15 seconds per cycle). Amazingly smooth & fluid movement! -
Ninja ScanPad Remote (Included) - Use the Ninja Remote to scan between 4 cameras (on/off) and control the position of each camera that is mounted on a Ninja Pan 'n Tilt base. Remote sends RF (Radio Frequency) signals to X10 Transceiver, which passes the signals through your house wiring to control the cameras. -
 Ultra Sweep & Scan Feature™ - Put your Ninja on Auto-Pilot! You can store up to 4 positions for each camera. Then using the "sweep" button on your Ninja ScanPad, you can automatically sweep thru the 4 stored positions (ex. front driveway, street, front lawn, and front door area.) Great for recording and monitoring an entire 240 degree area when you're not home!
-
Extremely Quiet! When the Ninja moves its
unnoticeable to people in the room!
| | 
The Ninja ScanPad Remote:
Scan between all your camera
using the C1 - C4 buttons. Use
the "blue" arrow buttons to pan
the selected camera left/right or
tilt up/down. Using the P1-P4
buttons set 4 separate locations
to monitor. Then by selected the
"sweep" button, Ninja will
automatically move to each
position then repeat.
Click to see enlarged photo
| |
buy this product at our store
![[Image]](http://i.d.com.com/i/dl/media/dlimage/81/80/4/81804_small.jpeg)
